Subject: Building A Mine Bag Part 2.
From: <Saved by Microsoft Internet Explorer 5>
Date: Mon, 22 Jan 2007 01:36:42 -0800

Building A Mine Bag Part
2...

Ok so now go ahead and put the lid
on the bowl and give it a little shake or two.

Now just take and pour the contents
onto a piece of paper, being careful not to have little runaway
stars!

Now take a piece of quickmatch,
remove the paper from about 3/4" off the end, and then bend the bare match to
form a letter "L" and lower the leader into the empty mine bag.

Now take the piece of paper with
all the effects on it and use it as a trough to pour all of the effects into the
mine bag. Then carefully fold up the 3 inches of tissue around the outside of
the tube, and sinch and twist it tight around the quickmatch. Then use a 3 inch
long piece of wire to twist and crimp around the tissue and quickmatch sealing
the device.

Your rolling now.......Immediately
mark or label the device to its effect.

As with any single device like a
shell, mine, candle etc. use a piece of visco at the end of your leader for a
safer shooting environment.

Wow you are done, (the device we
just made is to be shot from a 2 inch mortar about 8 inches high)